FRP Mini Mesh Grating

FRP Mini Mesh Grating
Product Introduction:
The square grid of FRP molded grating is arranged in a square shape, which is the most basic and common grid style. Its structure is uniform and symmetrical, the load-bearing capacity is balanced, the manufacturing process is relatively simple, and the cost is low. The square Frp mini mesh grating is the most widely used type of FRP grating due to its simple structure and high cost-effectiveness.It is particularly suitable for conventional occasions where there are no special requirements for the grid shape.
Send Inquiry
Description
Technical Parameters

Our small aperture molded grating is based on the primary load bars of large aperture with two extra intermediate crossbars at the top of the grating, creating apertures of 12.7x12.7mm and 13x13mm. The small apertures prevent most objects from falling through but still offers good drainage.

Small aperture grating panel is recommended for 'pedestrian-friendly' walkways frequented by pet walkers, strollers, carts, other small wheeled vehicles and especially high heel shoe wearers. For elevated turf applications, the small aperture size creates a smooth, strong surface that still allows water to drain efficiently.

Frp mini mesh grating is typically used on docks, piers, boat lifts, pontoons, jetties and decks. It is also used in and around pools, marinas, waterparks and other public recreational areas.

product-800-600

According to the force structure of the FRP grating,

the square grid can be divided into three types: large aperture, medium aperture and small aperture. Small aperture is a structural form of square grid that focuses on special purposes. We can providefrp mini mesh grating 12.7x12.7mm and 13x13mm, as shown in the specification diagram.

 

 
product-400-300
product-400-300
 
 
 
 
 
 

The following is a basic introduction to small aperture FRP molded grating.

1

Basic features

Opening rate: 25%-35% (significantly lower than conventional grids)

Surface flatness deviation: ≤0.5mm/m

Reinforcement density: 40% higher than standard grids

2

Safety protection performance

Fall prevention ability: Can block objects with a diameter of ≥13mm

Anti-slip properties: Dry friction coefficient: 0.75-0.85

Wet friction coefficient: ≥0.6 (ASTM D2047 standard)

3

Typical application scenarios

(I) Harsh industrial environment
Food and pharmaceutical: aseptic workshop corridors, packaging line platforms, clean room inspection channels
Electronics industry: chip manufacturing workshops, precision instrument assembly areas, anti-static areas

(II) Special safety places
Aerial work platforms: building exterior wall maintenance hanging baskets, bridge inspection passages, tower work platforms
Children's activity areas: amusement facility platforms, school corridors

(III) Application in professional fields
Medical facilities: operating room auxiliary platform, medical equipment maintenance area
Laboratory: chemical laboratory bench periphery, precision instrument base

4

Inapplicable scenarios of Frp mini mesh grating

Areas with large flow drainage requirements

Direct contact with highly corrosive media

Extreme heavy load (>8kN/m²) occasions

 

Hot Tags: FRP mini mesh grating, China FRP mini mesh grating manufacturers, suppliers, factory, pultruded grating, non slip fiberglass grating, pedestrian pultruded grating, frp grid, fiberglass grate panels, grp grating 38mm

Send Inquiry
We provide the most cost-effective FRP products
contact us